I have a 2610 at a central location that has 2 56k wic using to connect to branch offices using 1602's. So far only one of the 1602's can connect to the server at the central location. The second 1602 can see workstations behind the other 1602 but times out trying to access the server thru the ethernet connector. Both wics have the same configuration except the ip addresses for the serial interfaces. Any help will be greatly appreciated.
We are using static routes on both 1602s and the 2610. They are using older IOS (2610 - , 1602a - , 1602b - ). Both 1602s have default routes of the 2610, and the 2610 has a route back to each network over the correct serial interface. 1602a can access the ethernet segment behind the 2610, but 1602b cannot. I also believe this is a routing problem, but we can't implement any routing protocols with the IOS the routers are running, and would have to upgrade the memory and flash to support an IOS that has dynmic routing, although that would be my first choice, the customers don't want to spend any more money on their routers.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.