Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Question on the sh ver of a 6500 switch

When you do a sh ver on a 6500

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP1A-2GE SAD05030CFT Hw : 7.0

Fw : 5.3(1)

Fw1: 5.4(2)

Sw : 7.4(3)

Sw1: 7.4(3)

WS-F6K-PFC SAD05030HTA Hw : 1.1

what does the HW, FW, etc pertain to. Is this where the code which controls MLS/spanning tree/ etc is located?

1 REPLY
Cisco Employee

Re: Question on the sh ver of a 6500 switch

The following table lists the details

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/cmd_ref/sh_u_v.htm#32760

NMP Sw is the code which controls most operations

76
Views
0
Helpful
1
Replies