Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

"no ip dhcp use vrf connected" command

Where can I find the manuel page for the "no ip dhcp use vrf connected" command?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: "no ip dhcp use vrf connected" command

Wenmei,

You will not find a manual for this command, since this is a Cosmetic Bug.

Bug ID CSCsa75056

http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsa75056

The command will not affect your configuration as long as you are not using VRF. If in the future you decide to use VRF the command still will not be removed but you can enable it using the the same command w/o the "no".

This issue is fixed in 12.4(2.1), 12.4(2.2)T and higher.

Let me know if it helps.

Regards,

Arul

2 REPLIES
Cisco Employee

Re: "no ip dhcp use vrf connected" command

Wenmei,

You will not find a manual for this command, since this is a Cosmetic Bug.

Bug ID CSCsa75056

http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsa75056

The command will not affect your configuration as long as you are not using VRF. If in the future you decide to use VRF the command still will not be removed but you can enable it using the the same command w/o the "no".

This issue is fixed in 12.4(2.1), 12.4(2.2)T and higher.

Let me know if it helps.

Regards,

Arul

New Member

Re: "no ip dhcp use vrf connected" command

Hi Arul,

Thanks a lot!

Regards,

Sarah

768
Views
0
Helpful
2
Replies
CreatePlease to create content