Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

RADIUS Authentication for telnet?

Is it possible to configure an IOS 12.2 device to authenticate with my RADIUS server instead of TACACS+? I don't have TACACS+ so I've been using just the local logins. I haven't been able to find documentation that indicates this ability.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: RADIUS Authentication for telnet?

Yes you can use RADIUS instead of TACACS+.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hsec_c/part05/ch05/schathen.htm#wp1001032

Here are the basics for the commands to authenticate to a radius server at the following address 1.1.1.1 with a backup server of local routers user database.

aaa new-model

aaa authentication login default group radius local

radius-server host 1.1.1.1 key CISCO1

1 REPLY

Re: RADIUS Authentication for telnet?

Yes you can use RADIUS instead of TACACS+.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hsec_c/part05/ch05/schathen.htm#wp1001032

Here are the basics for the commands to authenticate to a radius server at the following address 1.1.1.1 with a backup server of local routers user database.

aaa new-model

aaa authentication login default group radius local

radius-server host 1.1.1.1 key CISCO1

123
Views
0
Helpful
1
Replies
CreatePlease to create content