Does anybody know if CiscoSecure for Unix version 18.104.22.168 can be used as a Radius server for 802.1x port authentication? I know the Windows version will do this and can be configured to assign a user to a specific VLAN, but can the UNIX software do the same?
If you are using TACACS+, verify that the PIX and server are communicating on the same port (Transmission Control Protocol (TCP)/49).
If you are using RADIUS, verify that the PIX and server are communicating on User Datagram Protocol (UDP) port 1645. Or, if the RADIUS server is using port 1812, verify that the PIX is using software version 6.0 or later, and then issue the aaa-server radius-authport 1812 command to specify port 1812.
Ensure that the secret key is correct.
Check the server logs for failed attempts. All servers have some kind of logging function.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.