Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

RAS using isdn PRI/BRI on 3662

I have one 3662 router with one isdn pri and 4 isdn bri connections .Can i use these isdns for setting ras , while the remote user uses a analog line .

Do i require some additional hardware card on router ?

what is the configurations?

2 REPLIES
Bronze

Re: RAS using isdn PRI/BRI on 3662

Cisco Employee

Re: RAS using isdn PRI/BRI on 3662

YES.. you need to have a digital model module along with those isdn lines. Those digital modem modules are mica modems with part number NM-6DM which has 6 mica modems. So based on simultaneous analog connections required, you need that many modems.

Here is the url for configuring 3600 routers using T1/PRI line and mica modems

http://www.cisco.com/warp/public/793/access_dial/t1_dialin_5412.html

Configuring Modem Connectivity with a Cisco 3640 BRI

http://www.cisco.com/warp/public/471/bri_3640.html

Just combine bri and pri config togather.

160
Views
0
Helpful
2
Replies
CreatePlease to create content