Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

rate limiting for ingress traffic in Cisco 2960 L2 Switch

Hi,

We have a requirement to restrict the ingress bandwidth to 512 kbps on a fastethernet port in Cisco 2960 L2 switch. Would be helpful if somebody let me know at the earliest.

3 REPLIES
Blue

Re: rate limiting for ingress traffic in Cisco 2960 L2 Switch

you can perform ingress and egress bandwidth allocation on the 2960.

please see the following link for 2960 bandwidth configuration: (ingress)

http://www.cisco.com/en/US/products/ps6406/products_configuration_guide_chapter09186a00805a7699.html#wp1065146

New Member

Re: rate limiting for ingress traffic in Cisco 2960 L2 Switch

Hi,

Is there any way to restrict bandwidth as low as 256K on a fastethernet port on 2960?

Document says about restricting from a minimum of 1 Mbps and multiples of it.

Thanks,

Bronze

Re: rate limiting for ingress traffic in Cisco 2960 L2 Switch

Hii raj,

the basic l2 switches can only police in multiples of 1 M, for minute limiting u will have to use higher l3 3500 switches or u can use a router with an l2 switch creating encapsulation.

pls do rate the post.

661
Views
4
Helpful
3
Replies
CreatePlease to create content