Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Read a command sh ip cache

Hello,

can you please tell me how can I determine the dscp value in the results?

and why we have an asterisk in front of the line Se1 / 0 192.168.87.156?

Router#sh ip cache 10.136.89.1 255.255.255.255 flow

IP packet size distribution (1360944M total packets):

   1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480

   .002 .411 .481 .013 .007 .005 .004 .002 .001 .001 .001 .008 .001 .002 .000

    512  544  576 1024 1536 2048 2560 3072 3584 4096 4608

   .000 .000 .001 .007 .042 .000 .000 .000 .000 .000 .000

IP Flow Switching Cache, 278544 bytes

  4079 active, 17 inactive, 445750941 added

  1698726152 ager polls, 0 flow alloc failures

  Active flows timeout in 30 minutes

  Inactive flows timeout in 15 seconds

IP Sub Flow Cache, 165128 bytes

  4079 active, 1041 inactive, 445750941 added, 445750941 added to flow

  0 alloc failures, 1734 force free

  5 chunks, 545 chunks added

  last clearing of statistics never

Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)

--------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow

TCP-Telnet  1300843399    302.8         7   162   2239.3       1.2       0.5

TCP-FTP        4168409      0.9         4    47      4.5       0.6       1.4

TCP-FTPD         40373      0.0        14   674      0.1       0.0       1.4

TCP-WWW    31657473924   7370.8         4   401  32146.8       0.7       0.9

TCP-SMTP         55914      0.0         3   255      0.0       0.2       1.6

TCP-X         90872816     21.1         2   119     60.3       0.9       2.6

TCP-BGP           7426      0.0         1    51      0.0       0.0       0.3

TCP-NNTP         10494      0.0         1    49      0.0       0.0       0.4

TCP-Frag            12      0.0         8  1480      0.0       0.0       0.8

TCP-other  40417291290   9410.3         4   290  37753.5       0.3       2.1

UDP-DNS      101696764     23.6         2    77     68.5       0.6       3.6

UDP-NTP       13067239      3.0         1    78      3.1       0.0       5.0

UDP-TFTP        674721      0.1         6    86      1.0       3.5       3.8

UDP-Frag        489782      0.1       706  1424     80.5       1.5       1.8

UDP-other  46275723602  10774.4        22    82 243252.3       0.8       0.5

ICMP         767922077    178.7         5   283    988.4       1.2       2.5

GRE           74492207     17.3        15   114    271.3       2.3       0.2

IP-other           701      0.0         1    21      0.0       0.1       4.2

Total:     120704831150  28103.8        11   141 316870.2       0.6       1.2

SrcIf         SrcIPaddress    DstIf         DstIPaddress    Pr SrcP DstP  Pkts

Gi0/0         10.136.89.1     Se1/0*        192.168.87.156  01 0000 0800     5

Gi0/0         10.136.89.1     Se1/0         192.168.87.156  01 0000 0800     5

Se1/0         192.168.67.176  Gi0/0*        10.136.89.1     01 0000 0000     5

Se1/0         192.168.67.16  Gi0/0         10.136.89.1     01 0000 0000     5

  • Other Network Infrastructure Subjects
1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Read a command sh ip cache

Hi,

To see QoS information you need to use this command : show ip cache verbose flow.

The asterisk signals you it is an egress flow.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
1 REPLY
Purple

Read a command sh ip cache

Hi,

To see QoS information you need to use this command : show ip cache verbose flow.

The asterisk signals you it is an egress flow.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
294
Views
0
Helpful
1
Replies