Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Real-Time Monitor 1.4

I having some trouble capturing and/or monitoring traffic with Real Time Monitor 1.4. I have Cisco catalyst switches on my network. I use 3508, 3524, and 3548. All are listed under devices supported by RTM 1.4. I'm able to look at Layer 2 traffic, but I'm unable to monitor the Network and Application layers. Does anybody have any suggestions/advice. Thanks in advance.

5 REPLIES
Blue

Re: Real-Time Monitor 1.4

If you have added the switches to the RTM Server, then launch Traffic Monitor and goto Switch Tab->All Switch Ports, select the port and do a right mous click to launch Data Link Layer Graph.

New Member

Re: Real-Time Monitor 1.4

I would also like to Launch Data Capture from here but the selection is greyed out. Can you tell me how I can use the Data Capture feature. Thanks in advance.

Blue

Re: Real-Time Monitor 1.4

Without a Switch/RMON Probe or a Network Analysis Module (NAM) you cannot do Data Capture. This option will be grayed out if you don't have a probe/NAM connected and spanned.

New Member

Re: Real-Time Monitor 1.4

Is a Switch/RMON probe embedded in the Switch IOS or is it a piece of hardware?

Blue

Re: Real-Time Monitor 1.4

Switch Probe is a separate piece of hardware available from www.netscout.com

282
Views
0
Helpful
5
Replies