I'm trying to find a router that will allow me to build a NAT table so I can set up static routes from specific computers on one of my networks to one of my other networks. I'm not cisco certified, so I don't want to spend a bundle on some crazy router that will brush my teeth for me. I just wanna be able to mess around with a router and hopefully figure it out so I can make it work.. Anyhow if anyone has a suggestion for a router that will allow me to build a NAT table easily(or somewhat easily), could you please let me know what model, and where I can find a PDF of setting up the NAT before I go out and spend a bundle on the wrong thing.
If there's not a lot of traffic here, and you're going ethernet to ethernet, then a littel 800 series with two ethernet ports would work fine. But it really all depends on the traffic levels you are talking about.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...