for a detailed site planning I am searching for a recommendation from Cisco about the ambient temperature for Switches (2924XL,4500, 6500). In the specifications sheets I have found only a range of 0 - 40 °C and it´s very expensive to cool down a room to 0 °C and also I don´t think a C6500 switch can´t reach a mtbf of 7 years in a room with 40 °C.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...