Recommended CatOS and IOS for Catalyst 4006 with SUP II

pmkpal · ‎03-23-2003

We have Catalyst 4006 switches each with following config :

WS-X4013 CatOS 6.1(2)

WS-X4232-L3 IOS 12.0(10)W5(18f)

WS-X4148-RJ

WS-X4306

I would like to know the recommended CatOS and IOS versions for the above configuration

Regards

raymong · ‎03-24-2003

Use the hardware/software compatibility matrix to determine what IOS and Cat OS supports your hardware configuration.

http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi

pmkpal · ‎03-24-2003

Thanks raymong,

What i want it the latest stable releases for the said configuration. The matrix show the minimum required releases.

Regards

Parag

Prashanth Krishnappa · ‎03-25-2003

6.4(2) for Sup2 and 12.0(18)W5(22b) for RSM. However I suggest that you read the release notes for known issues/features

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/index.htm

pmkpal · ‎03-25-2003

Thanks prkrishn,

We have just received one new 4006 which has 7.4(2) pre-installed on its sup-ii, while all my existing 4006 has 6.1(1) installed on thier sup -ii. Rest of the switch config. remains same.

I would like to have a uniform configuration of CatOS on all my 4006. Should i upgrade all of them to 7.4(2) or downgrade the new one to 6.4(2) as suggested.

Regards

Parag