the c6msfc3 doesn't seem to have a boot image for disaster recovery :(
I got into that mess one day. I tried booting using the device name of "disk0:", and "sup-disk0:" with no success. What I did was to boot the switch up using the Native IOS image.
Before I did this, I changed the config register on the MSFC3 to 0x2102, using the "confreg 0x2102" command. When the sup booted its piece of the Native IOS image, the MSFC3 automatically booted up its piece of the native ios code. From there I was able to copy the Hybrid MSFC3 image to the MSFC3 bootflash, and converted the switch back to hybrid mode.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.