Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Redistribute static with subnet info

I'm running a couple of routers and using rip2 as the routing protocol and advertises the static routes with Redistribute static. But now I added a static route on one of the routers,

ip route 193.45.139.240 255.255.255.255 10.0.4.105

but when I check the routing tables on the other routers they've got

R 193.45.139.0/24 [120/1] via 10.0.5.2, 00:00:01, GigabitEthernet5

Why isn't the subnetmask advertised? Rip2 handles different subnetmasks all the other time.

Here is a pice of the running.config:

router rip

version 2

redistribute static

network 10.0.0.0

!

ip classless

ip route 0.0.0.0 0.0.0.0 10.5.1.31

ip route 193.45.139.240 255.255.255.255 10.0.4.105

ip route 194.22.190.13 255.255.255.255 10.5.1.60

ip route 195.198.127.34 255.255.255.255 10.5.1.60

ip http server

!

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Redistribute static with subnet info

router rip

..

no auto-summary

!

will fix it.

4 REPLIES
Purple

Re: Redistribute static with subnet info

Try the command "redistribute static subnets" .

New Member

Re: Redistribute static with subnet info

It dont reconize the option 'subnets'

Is it availiable for the Rip2-protocol?

New Member

Re: Redistribute static with subnet info

router rip

..

no auto-summary

!

will fix it.

New Member

Re: Redistribute static with subnet info

Yes, no auto-summary did it! Thanks

244
Views
0
Helpful
4
Replies