Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

redistribution from ospf into eigrp

If I have 3 routers running ospf and want to redistribute eigrp into this, what metrics do I need to use ?

thanks

3 REPLIES

Re: redistribution from ospf into eigrp

Hi Carl

If u r redistributing eigrp then u have to use all the metrics of EIGRP i.e bandwidth,delay,relaibility,mtu and load.

Thanks

Mahmood

Re: redistribution from ospf into eigrp

The default metric values for ethernet are 10000 100 255 1 1500

Hope this helps

Martin

New Member

Re: redistribution from ospf into eigrp

I'm assuming you are wanting one way redistribute. If you are wanting to redistribute EIGRP into OSPF you will need to use a COST based metric such as;

redistribute eigrp 65001 metric 100 subnets

-or-

redistribute eigrp 65001 subnets

default-metric 100

A metric is not required for OSPF, however, if you redistribute an IGP into OSPF without specifying a default-metric, it will be assigned a metric of 20. The OSPF metric is based on the 10 to the 8th / bandwidth of the link. For example, Ethernet cost is 10.

Please rate post if it helped.

Thanks!

344
Views
0
Helpful
3
Replies
CreatePlease login to create content