04-06-2004 12:36 AM - edited 03-02-2019 02:49 PM
Router A-----Leased line-----outside#Router B(NAT)#inside
|
|-----Leased line-----outside#Router C(NAT)#inside
i have two static nat router(cisco 7206) with same public&private ip address for redundancy and load balancing.(it is not connected with the ISP)
when i had tested it from outside, there was no problem.
but from inside with ftp,there are some problem.
connection was no problem but type the ls command no response from ftp server.
IOS version is 12.3.1a
i could not figure out it
surely i found some documentation for nat from cisco.
for example, stateful nat and nat with hsrp. but only it is for redundancy not for load balancing.
anybody help me ?
04-13-2004 09:17 AM
Any update on this ?
04-14-2004 08:49 PM
What is the gateway for the host inside network (RouterB/RouterC) ?
Are u using HSRP between Router B and C ?
Are u using any firewalling rules/packet filters in the routers / any firewall in the path?
Other than FTP, have u checked any other services ?
Have you checked without load-balancing / single link?
04-15-2004 03:48 PM
surely i use the HSRP(router B is active and C is standby)
there is no any firewalling rules and firewall.
i had tested it with single link, for example, when by turns, had powered the Router B and C off,it worked well.
thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide