Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Redundant Core Configuration

I'm working with two 6500 switches both having Dual SupII and MSFC cards. The current 6500 is the core of our network and I'd like to add the secondary 6500 at this point but am still a bit unfamiliar with the technologies and practices I will need. Does anyone have examples, scenarios or best practices for redundant core switching/routing and/or the technologies involved?

Thanks in advance!

2 REPLIES
Cisco Employee

Re: Redundant Core Configuration

Are you gonna run Hybrid or Native IOS? If hybrid, the following page should help you

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg_gd/redund.htm#19253

Gold

Re: Redundant Core Configuration

http://www.cisco.com/warp/public/cc/so/neso/lnso/cpso/gcnd_wp.htm

its a start. Kennedy Clarkes book on cisco lan switching is pretty good too

94
Views
0
Helpful
2
Replies