Does Cisco (or any other manufacturer for that matter) have a router in the price range of about $400 that will automatically switch from an RF (2.4Ghz; 11Mbps) link to a backup ISDN (BRI; 128Kbps) link if the RF link goes down? Does someone know how to set this up so we don't have to be pulling plugs and flipping switches manually when our wireless link goes down? Check out our overall design at: http://www.spacs.k12.wi.us/wireless.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...