Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Remote 3508 - Is their a CLI cmd to check if a non-used Gbic is installed?

I wish to verify if a 3508 has a Gbic installed in a particular slot. The interface is not in use currently. I would expect a CLI comand would be able to determine this, at least for the purpose of identifying the Gbic H'ware. The device is at a remote location.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Remote 3508 - Is their a CLI cmd to check if a non-used Gbic

Yes there is a way.

Do a show interface gi xx and check for media type. It will say media is missing if no gbic installed. If gbic is installed it will say type, SX, LX.

Hope that helps

Ian

3 REPLIES
New Member

Re: Remote 3508 - Is their a CLI cmd to check if a non-used Gbic

Yes there is a way.

Do a show interface gi xx and check for media type. It will say media is missing if no gbic installed. If gbic is installed it will say type, SX, LX.

Hope that helps

Ian

Cisco Employee

Re: Remote 3508 - Is their a CLI cmd to check if a non-used Gbic

Do a "sh interfaces status"

New Member

Re: Remote 3508 - Is their a CLI cmd to check if a non-used Gbic

Thanks for your assistance. The sh int status cmd is not supported on this IOS. The sh int giX command confirmed the media type as SX, therfore installed.

Thanks, Nic.

202
Views
0
Helpful
3
Replies
CreatePlease to create content