anybody knows how to fix a frame relay problem? i moved my servers a floor down and now our remote offices can't connect to our servers. they used to dial up to our server to a certain application we have and now both internet and our citrix are non-functional. thanks in advance!
i just named it as such since it's the existing service that was affected. i have a 1600 cisco router which was moved together with the rest of the servers. i don't know if it was reset or something coz all the cabling and wires were moved as is. meaning it was the exact way it was upstairs. would it reset by itself when you turn it off for an extended period of time like say 45-1 hr? we just turned off everything during that time frame. our main connection is up but our remote offices are not. it was set up two modems which i don't know what it was used for. if you have T1, do you still need to ride on modems? those are the only hitches i can think of right now.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...