cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
188
Views
0
Helpful
1
Replies

reserved B-channels with PRI and rotary-group

admin_2
Level 3
Level 3

I have a 2600 router with ISDN PRI and 1 serial Interface. Approx. 150 Clients are connecting to the PRI. In case of a serial link failure there should be ISDN-Backup (2 B-Channels) over the same PRI the Clients are connecting to.

Is there a possibility to configure a rotary-group but give the 2 B-Channels (needed for backing up the serial line) priority over the others? Like if all 30 channels are in use by some clients to drop 2 channels and use them for the backup.

With dialer-profiles I could reserve 2 channels for the backup but I want to avoid configuring 150 dialer-interfaces.

1 Reply 1

Not applicable

There is no way to prioritize dialer

maps that will cause existing connections

to be torn down. The best that I can

suggest is you try the command ,

which will cause the fast-idle timer to be

used instead of the idle-timer in the

event that all links are used and we need

to dial out to a new site. If the existing links

still have interesting data, you may not

see a disconnect right away. You could set the

fast-idle to a low value (like 5), but

beware that this may cause more than just

2 links to drop.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: