Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Reset in a supervisor of a Catalyst

I have a Catalyst 6506 with 2 supervisors, but one of them reset byself and in becomes in other state and I don't know why.

I show the command show modules:

Catalyst6506> (enable) show module

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

2 2 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes standby

16 2 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

3 3 16 1000BaseX Ethernet WS-X6416-GBIC no ok

4 4 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok

Mod Module-Name Serial-Num

--- -------------------- -----------

1 SAD05060PSA

15 SAD05060S1E

2 SAD050614CN

16 SAD05060YWA

3 SAL0541CWQG

4 SAD04110A3B

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-04-de-98-74-66 to 00-04-de-98-74-67 7.0 5.3(1) 6.3(1)

00-04-de-98-74-64 to 00-04-de-98-74-65

00-01-64-2f-c8-00 to 00-01-64-2f-cb-ff

15 00-05-32-19-e9-c0 to 00-05-32-19-e9-ff 1.2 12.1(2)E, 12.1(2)E,

2 00-02-7e-27-50-ba to 00-02-7e-27-50-bb 7.0 5.3(1) 6.3(1)

00-02-7e-27-50-b8 to 00-02-7e-27-50-b9

16 00-05-32-1d-a8-40 to 00-05-32-1d-a8-7f 1.2 12.1(2)E, 12.1(2)E,

3 00-07-4f-6a-bb-a0 to 00-07-4f-6a-bb-af 1.0 5.4(2) 6.3(1)

4 00-01-96-0e-d4-b0 to 00-01-96-0e-d4-df 1.2 5.1(1)CSX 6.3(1)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- ----------------------- ------------------- ----------- ------

1 L3 Switching Engine WS-F6K-PFC SAD05060UAC 1.1

2 L3 Switching Engine WS-F6K-PFC SAD05060UH0 1.1

Catalyst6506> (enable) 2002 Jan 03 08:33:15 %SYS-5-MOD_NOSCPPINGRESPONSE:Module

15 not responding... resetting module

2002 Jan 03 08:33:15 %SYS-5-MOD_RESET:Module 15 reset from Software

Catalyst6506> (enable) show module

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no other

2 2 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes standby

16 2 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

3 3 16 1000BaseX Ethernet WS-X6416-GBIC no ok

4 4 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok

Can anybody help me?

May be the module 15 faulty?

Thanks a lot

1 REPLY
Community Member

Re: Reset in a supervisor of a Catalyst

12.1.2E is the first version which supported MSFC2 and I would really would like to run the latest 12.1.8b.E7 and let us know if the MSFC is more stable in that version. It may not be bad hardware so please upgrade and observe the module. Make sure you upgrade both the MSFSc. As for sup, 6.3.3x is recommended

126
Views
0
Helpful
1
Replies
CreatePlease to create content