We've the Cisco Switch Series for 3500 XL and 4000 that we are trying to re-set the passwords for. I was able to find alot of information on how to reset the passwords, but before I do that, we want to be very certain that the process for reseting the password [by powering down the switch and upon powering on to hold the 'mode' button on the switch that this does NOT WIPE OUT ANY CONFIGURATION?? Part of the reason is that the Cisco 3500 XL is configure for Fiber connectins so we are afriad if something were to happen to the configuratons file, this would cause connectivity issues.
Re: Reset Password for Cisco Switch 3500 XL and 4000
As long as you follow the Password Recovery Procedures you will not loose your configuration. All you are really doing is changing the Configuration register which will enable you to change your password.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...