I am currently using a cisco router IOS-12. I apoligize as I am new at using the cisco routers. What is happening is that a web site off of our lan is not resolving, for everyone else in the world it is resolving. I can ping the ip of the address (although seems quenched)...but not the name. I have done slot of research as to why this is not resolving on other services but not ours...my suspician is the eigrp protocol needs to be looked at, but I dont know where to start...any suggestions or links would be very helpfull.
It does not appear that routing is the issue here. It is more likely to be DNS if you can ping the site by IP address and not by name. One way to troubleshoot would be to use the command 'nslookup' on a machine on your LAN. Once you enter that, type in the DNS name of the site that you are trying to access. I suspect it will not resolve to the right address.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...