I need some information on Restricted network access. We want to implement restricted access to network based on username/password and Date/time. Whenever a user starts his machine and tries to access the network he should be asked for username/password. Based on username the access should be restricted by date/time. For example if i try to login to the network and get authenticate, i should be allowed to access the network only on weekdays and from 9:00AM to 5:30PM.
I'm not sure what the exact network topology is or how users will access the network. If you are looking for a form of Authentication before users logged into NT you could do this with cisco Catalyst switches starting with the 2950's using 802.1x.
In order for a user to be able to pass traffic on the switch port the switch will query an AAA RADIUS or TACACS server for authentication/authorization parameters. If that passes then the user can pass traffic on the switch port, and log into the Domain.
You need NICs that will support 802.1x in order to do this.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...