Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Reverse telnet to modem on AS5350.

Can any one tell me how to get in to modem on AS5350 and configure Inactivity timer on it. I have a Nextport DMM.

4 REPLIES
New Member

Re: Reverse telnet to modem on AS5350.

You can do "show line" to see the available lines. Reverse telnet to an available line using any interface on the router that is in the "up/up" state.

Never heard of setting inactivity timeout on the modem, unless it can be done with some AT commands.

There are two timeouts that you can set, one is the "PPP" timeout and the other is "exec" timeout.

PPP: configured on the interface

dialer-timeout

Exec timeout: Configured on line

exec-timeout

Hope this help you.

New Member

Re: Reverse telnet to modem on AS5350.

I will re phrase my question. If there is no activity in the connection for a specified ammount of time, I wanted to disconnect the line. How can I acheive this as I have number of international dial out locations.

Can I get in to the modem module and give "AT" commands? If so how ?

TIA,

Ravi

New Member

Re: Reverse telnet to modem on AS5350.

You can reverse telnet to the modem of Nextport. You may find the TTY no. by using "show caller" command if a user connecting to the AS5350.

140
Views
0
Helpful
4
Replies
CreatePlease to create content