Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Reverse telnet to other manufacturers devices

As subject:

Can anyone suggest a good site or supplier (prefer UK or US), that understands the necessary cabling required (DB9/DB25 connector clocks really) to connect Nokia, SUN and Linux based systems to Cisco routers for remote console management.

Cheers,

2 REPLIES
New Member

Re: Reverse telnet to other manufacturers devices

Hi,

Did you ever get a reply on this one?

What hardware are you using- I've got the same problem!!

Cisco 2610

NM-8A/S

What config did you use?

Many Thanks

Simon Watkins

Itex (Jersey) Ltd

Cisco Employee

Re: Reverse telnet to other manufacturers devices

First of all you need to know what kind of cable and connector need towards the devices that you want to console into.

Based on that if you want to use the cisco rotuer ro consoled into the devices, here is the cable guide from cisco which has part numbers too if you want to order.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2509/acsvrug/cables.htm

Now here is the url which will help you how to configure the router for console access to SUN boxes.

http://www.cisco.com/warp/public/793/access_dial/sun_comm_server.html

Also

http://www.cisco.com/warp/public/793/access_dial/comm_server.html

Hope this helps..Thx..Tejal

142
Views
0
Helpful
2
Replies