RME 3.4 and cat4000IOS change device attributes with SSH connection

[ppoiron]

I have 3 cat4000IOS with IOS 12.1(13)EW CV/SSH IOS.

I managed them with CiscoWorks2000 LMS 2.1 with RME 3.4.

On the 4506, I put transport input ssh on the line vty 0 4 to select only SSH

for the connections and the order of transport is SSH,Telnet,TFTP in RME.

With this configuration, when I change the 4506 attributs to set TACACS login

and password, I got a failed in the check devices attributes for these equipments.

If I replace transput input ssh by transport all in the 4506 configurations,

the check is OK.

Nevertheless, with transport input ssh, configurations are archived in RME

without problem.

Any idea ?

Thanks for help.

Patrice

[rmushtaq]

If you do a CCO Bug Toolkit search, you'll find several bugs on Check Device Attributes similar to this.

[ppoiron]

I checked on CCO Bug Toolkit and I found CSCdz44557 which is exactly the description of the problem I encountered.

The status of this incident is Postponed. I put a watch on it, but do you know

how I can have more informations on the problem solving without opening a case ?