I have a problem, RME complains that it cant login with telnet to our 6500 CatOS switches. (when doing check attributes)
The 6500's that are pure IOS and the 3550's works fine.
When using a sniffer, I can see that it successfully logs on through telnet, (I can see RME getting the prompt after login), but it never tries the enable password or even logout. The RME just dont get that it has successfully logged on, or so it seems anyway.
Ive reentred the passwords, even made an export to see that all passwords and so is fine - and as a last option I deleted the devices and put them in manually again. Sadly with no difference.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...