RME v3.4 canot pull IOS image from catalyst 2950 switches

[d-tay]

I installed RME v3.4 with IDU version 2.0. Using the software management module, I was able to pull CatOS image from the catalyst 4000 and 6509 switches, but when i try to pull CatIOS from catalyst 2950, igive me the following error :

SW01_SZBAP_H3L3 Image import operation not supported

I will appreciate if anyone has encountered a similar problem and ways to solve it.

Thanks

[rmushtaq]

Are you trying to do a Library->Add Images with Source = Device which is 2950 in this case?. If this is true, then it's not supported for such devices per:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cw2000e/e_3_x/3_4/dev_sup/e3_4.htm#49131

'1Software Management: Image library import from device, baseline, and synchronize not supported'

[d-tay]

Yes in this case. Thanks for yr input.