Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RMON Caputre on 2500 Routers

When enabling promiscious mode on a given ethernet interface, and configuring the rmon collection mode.

No matter what we configure, we never see any host, matrix, or topn statistics from the show rmon xxxx commands.

Is there some other requirement for this to work, we are using IOS12.2 IP-Plus version.

  • Other Network Infrastructure Subjects
1 REPLY
New Member

Re: RMON Caputre on 2500 Routers

This is out of the below link:

All Cisco IOS software images ordered without the explicit RMON option include limited RMON support (RMON alarms and event groups only). Images ordered with the RMON option include support for all nine management groups (statistics, history, alarms, hosts, hostTopN, matrix, filter, capture, and event)

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/fun_c/fcprt3/fcd301b.htm

You might want to check out the feature navigator on the TAC at:

http://www.cisco.com/cgi-bin/Support/FeatureNav/FN.pl

90
Views
0
Helpful
1
Replies