Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RMON ON Cisco 7513 Router

Hi,

Is RMON supported on 7513 router....I am running IOS 12.1(7)...if yes how do we enable it..Any help on this is appreciated..

Thanks

5 REPLIES
Blue

Re: RMON ON Cisco 7513 Router

IOS only supports RMON Alarms and Events. If you want to know how to setup this, see: http://www.cisco.com/warp/public/477/RMON/18.html

New Member

Re: RMON ON Cisco 7513 Router

Hi,

The output of "show Snmp" doesn't show if RMON is enabled or not.Do you mean to say if we configure the alarms and events its enabled globally..I am not clear with this..Please can you explain..

thanks

Blue

Re: RMON ON Cisco 7513 Router

show snmp output has nothing to do with RMON. Have a look at:

http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/rmon.htm which will help you understand RMON better. Then look at:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/fun_r/frprt3/frd3001a.htm which explains the relevant RMON commands in detail with examples.

What exactly you want to do by configuring RMON on this router?

New Member

Re: RMON ON Cisco 7513 Router

Hi,

I would like to capture the information about CRC errors,input ,ouput errors on the interface.If you look at the following link for ethernet statistics under the OID tree,the statistics comes under RMON..

http://www.cisco.com/cgi-bin/Support/Mibbrowser/unity.pl?o=1.3.6.1.2.1.16&t=yes&st=3#oid

Without implementing or enabling RMON can we do capture of these statistics.How do we enable these MIB's

I am using third party Performance monitoring tool Denika.Is there any other way to do this.

And also the document which u sent me,particularly talks about enabling RMON for ethernet interface on 2500 and AS5300.I already tried these commands,these are not recognized on the 7513.

And also can we monitor for the same statistics on frame connections,ATM etc..

Thanks for your help...

Blue

Re: RMON ON Cisco 7513 Router

2500/AS5300 are different than 7513. For monitoring the input/output errors etc, you can directly poll objetcs from RFC1213-MIB like IfInErrors etc. You can look at: http://www.cisco.com/warp/public/477/SNMP/5.html for this. As for RMON on 7513, you'd need to have an external probe with some RMON application to get the data.

104
Views
0
Helpful
5
Replies
CreatePlease login to create content