Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

rookie mistake-bigtime

I actually have two questions:

#1 I had two switches (2900XL) go down at work today and succeeded in restoring one by copying a config file from a remote tftp server. While working on the next one I deleted both the nvram and flash (don't ask). Of course, now this switch will not boot and is pretty much dead. My research so far indicates that I must somehow get a flash memory card with bootable file and install it. Of course if I'm dumb enough to erase the flash, maybe I'm wrong.

Question #2

Should I bother to go to work tomorrow?

Any help would be greatlt appreciated.

Joe

1 REPLY
New Member

Re: rookie mistake-bigtime

Don't be to hard on yourself. Many folks had made this mistake. Here is the recovery process. Good luck.

http://www.cisco.com/en/US/customer/products/hw/switches/ps607/products_tech_note09186a0080094955.shtml

101
Views
0
Helpful
1
Replies