Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

route-map and ip next-hop

I have the following route-map configured:

!

route-map unlimited-traffic permit 10

match ip address 101

set ip next-hop 203.63.121.150

!

access-list 101 remark ACL for Policy Routing to force certain subnets via Open-pipe

access-list 101 permit ip 203.149.70.0 0.0.0.255 any

Which works as expected, by forcing any ip range defined in acl 101, out via 203.63.121.150.

My problem is that even traffic from source acl 101, to destination that is local to our 7206 is also going to 203.63.121.150 first, then back to the 7206.

I would rather traffic destined for local ip's, not go via 203.63.121.150 - Would I need to add all local ranges to the ACL 101 (i.e. deny destination local_ranges)

Thanks in advance,

MB

1 REPLY
Community Member

Re: route-map and ip next-hop

Please disregard - Added appropriate deny's fixed the problem.

Regards,

MB

272
Views
0
Helpful
1
Replies
CreatePlease to create content