Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

route-map in "ip nat inside" command

No matter how I tried, I just could not find the proper explanation of this "route-map" option. I am referring to the ip nat inside source route-map lalala version...

There are few examples, but no real explanation. What is route-map?

2 REPLIES
Bronze

Re: route-map in "ip nat inside" command

Hi,

This page explains the difference between using a routemap and using an acl:

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml

hth

Herbert

New Member

Re: route-map in "ip nat inside" command

You can use multiple nat pools with the route-map option or doing multiple different nat translation going through the same iface

144
Views
5
Helpful
2
Replies
CreatePlease to create content