Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Route problem

I have a Router A and a Router B directly connected. On both Routers eigrp (distance 170) and Rip(AD 120) are running. On Router B the ip address of eo is 10.10.1.2/24 and a computer is connectes with ip 10.10.1.11/24. From Router A i can ping the 10.10.1.2/24 but not the 10.10.1.11/24 which is the PC. The strange thing even from Router B i can not ping the 10.10.1.11/24.

All routes are advertise by poth protocols as

router rip

network 10.0.0.0

router eigrp 1

distance 170 0.0.0.0 255.255.255.255

network 0.0.0.0

What might be the problem?

Thanks

moses

3 REPLIES
Hall of Fame Super Blue

Re: Route problem

Hi

Check

1) Do you have a personal firewall on your PC.

Also just for completeness make sure you have default-gateway on PC set to 10.10.1.2 and the correct subnet mask of 255.255.255.0.

HTH

Jon

New Member

Re: Route problem

Yes jon i checked everything those. They are ok.

New Member

Re: Route problem

post the configurations for both routers

145
Views
0
Helpful
3
Replies