Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Route to outside of PIX with dynamic IP address

Hi, I'm setting up a pix 501 IOS 6.3 which has a dynamic IP assigned from our ISP router.

I've the line in the config "ip address outside dhcp setroute" so I can see its getting an address assigned when loking at router config.

Do I need then the line for the default gateway "route outside 0.0.0.0 0.0.0.0 ...." If so what follows the 0's?

On a second note, if an external port is assign IP address dynamically then on a remote peer which would be et up with a VPN tunnel, how is told about the PIX with dynamic IP address?

Thanks for any help.

1 REPLY
New Member

Re: Route to outside of PIX with dynamic IP address

HI,

For the default route check if you can assign the exit interface as the gateway.

for the outside clients you will have to use DDNS.

hope this helps

111
Views
0
Helpful
1
Replies