Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

router 2600 with nm-16am

for the command:

>show modem operational-status 1/2

(for view link statistics in real time)

This command is supported for the IOS IP software ? or Is neccesary the MMTL software ?

Sorry, for my English

Thank

5 REPLIES
Cisco Employee

Re: router 2600 with nm-16am

I don't think that sh modem operational-status is supported on 2600 platforms. It is supported on 3600 related platforms and on all the access servers. Pl. visit following url for more

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122tcr/122tdr/drfshmn.htm#1073283

You do not need MMTL for that.

Silver

Re: router 2600 with nm-16am

"sh modem operational-status x/y" is supported on the 2600 platform......Just tried out the same on my lab 2600.....It is supported on all IOS images that support the NM-xAM cards.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121sup/121csum2/121dial/dsdshom.htm#1032435

Thanks, Mak.

Community Member

Re: router 2600 with nm-16am

thank for your response.

Without the MMTL software,

What modem command are not support without the MMTL ?

What are the real features or benefit of the MMTL (Modem Management Technology License) ?

Cisco Employee

Re: router 2600 with nm-16am

http://www.cisco.com/cgi-bin/Support/Cmdlookup/home.pl

above url is for command lookup tool .

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122tcr/122tdr/drfshmn.htm#1073282

The show modem operational-status command is supported on access servers with internal MICA technologies or Microcom analog (NM-AM) modems, but not on servers with internal Microcom digital modems.

Nilesh

Community Member

Re: router 2600 with nm-16am

thank for your response.

Without the MMTL software,

What modem command are not support without the MMTL ?

What are the real features or benefit of the MMTL (Modem Management Technology License) ?

84
Views
0
Helpful
5
Replies
CreatePlease to create content