Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

router 2612 has 2 serial interface(t1)/1 ethernet

I am new to configuring the router.

I have two class C ip address and 2 class C/30 ip address. can I configure my router as follow. I have two leased t1, do I have to configure dialer statment?

int e0/0

ip address 192.168.2.1 255.255.255.0

ip address 192.168.3.1 255.255.255.0 secondary

int s0/0

ip assress x.x.x.126 255.255.255.252

int s0/1

ip address x.x.x.134 255.255.255.252

I have specified the default route and static route for load balancing and not have any routing protocol.

ip route 0.0.0.0 0.0.0.0 208.173.110.125

ip route 0.0.0.0 0.0.0.0 208.173.110.133

ip route 206.25.102.0 255.255.255.0 208.173.110.125

ip route 206.25.102.0 255.255.255.0 208.173.110.133

ip route 208.154.86.0 255.255.255.0 208.173.110.125

ip route 208.154.86.0 255.255.255.0 208.173.110.133

Thanks,

mrp

1 REPLY
Community Member

Re: router 2612 has 2 serial interface(t1)/1 ethernet

Hi,

your default routes already covers the other static routes, so you don't need them.and you don't need a dialer statement for a leased-line.

88
Views
1
Helpful
1
Replies
CreatePlease to create content