09-04-2006 03:34 AM - edited 03-03-2019 04:48 AM
Hi,
I'm having this error when i boot my 2811 router:
System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)
Copyright (c) 2005 by cisco Systems, Inc.
Initializing memory for ECC
.
Bad RAM at location 0xA00000E0: wrote 0xA00000E0, read 0xA00200E0
Do you have any idea about what the problem could be and how i can solve it???
regrads
Fady
09-04-2006 03:46 AM
Hi
It look like , hardware related issue, check RAM , fixit up in properly in slot, then try to reboot the router, else replace RAM.
-Minu
09-04-2006 05:03 AM
Hi
Was the router a functioning one?If that is the case then you have faulty RAM.
If its a new router...then the router's RAM may have not been seated properly.
You need to open the router:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/2800/hw/10_hw.htm#wp1026137
Hope that helps
Regards
JD
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: