Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Router 3640 hangs during ROMMON start-up tests

Hi all,

I get the below message on the console of a 3640

router. Anyone knows what this mean ? HW or SW

failure ? I can't get in the ROMMON via Ctrl-Break.

Thanks

Ralf

System Bootstrap, Version 11.1(7)AX [kuong (7)AX],

EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)

Copyright (c) 1994-1996 by cisco Systems, Inc.

*** GT64010 Master Abort Interrupt ***

PC = 0xbfc00c08, Cause = 0x4000, Status Reg = 0x3041f003

Failure detected during ROMMON start-up tests. Restart ROMMON.

  • Other Network Infrastructure Subjects
1 REPLY
VIP Purple

Re: Router 3640 hangs during ROMMON start-up tests

Hello Ralf,

the GT64010 is the PCI controller, if you are having this error you probably have a hardware problem. Your best bet will probably be to contact TAC and see if they know a way to fix it.

HTH,

Georg

266
Views
0
Helpful
1
Replies
This widget could not be displayed.