Have cisco router 770 in school, lan with 35 PC's connecting through router to Internet. Can only get 20 pc's onto internet,all 35 can access every thing on the lan but only 20 can access the internet. Does the router store the mac addresses in it's memory and only allow a set number of addresses?
I don't think thats the case. Cisco 770 Router is only used for a small Lan design and if I am not wrong cisco says that it should handle only 8 Pc's(you can crosscheck in the Cisco 770 manual) but still you are able to use 20 Pc's.
I would suggest you to go for one more 770 router and with one more ISDN line as it will improve the performance of the Lan and all the users will not find the speed of the internet slow while browsing it. Also you will can accomodate 5 users for the future growth as total are 35 and you can go for 40 users on 2 seperate routers.
As per my own experience on Cisco 775 Routers thats my advice and I hope it will help you.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...