Sorry about my question, but I was searching more than half an hour on CCO, no result. I have to test a used Cisco router for our spare stock.
In front view he is marked with 'Cisco7000',he has 7 slots. Looks like an Cisco7507, two Powersupply on the left, seven slots in horizontal order, means, boards are vertikal in use. BUT RSP board is in Slot '7' and SP board in slot6. Slot6 is labeled with 'SwitchProcessor' and Slot7 with 'RouteProcessor'. SerialNumber is 000883.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...