Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Router Booting to rommon

My router keeps booting to rommon. I type in boot, then it loads flash and everything is back to normal. Then if reload or reboot the router, it goes right back to rommon. I have erased flash, nvram, reinstalled flash, set everything to default i.e. out of box settings and issue remains.

Router: 831 SDM

Flash 12.3.14T6

Memory: 18/64

2 REPLIES
Silver

Re: Router Booting to rommon

With the router booted up type 'show version'.

This will display the configuration register setting.

Im guessing it is currently set to 0x2100 or 0x100.

If so, change it to 0x2102 with 'config-register 0x2102'. Then reboot.

Please rate all helpful posts.

Brad

Community Member

Re: Router Booting to rommon

Thanks Brad, I'm up and running again.

249
Views
5
Helpful
2
Replies
CreatePlease to create content