12-27-2005 08:32 PM - edited 03-03-2019 01:15 AM
I downloaded the new image into Cisco 2620, but now every time after loading a flash image and after checking RAM and board, the following error appears:
========================================
*** Watch Dog Timeout ***
PC = 0x808968ec, SP = 0x81112920
C2600 platform with 32768 Kbytes of main memory
=======================================
After this error, the router reboots. I dont know what to do as the prompt does not appear.
The full boot up sequence is:
=======================================
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x541314
Self decompressing the image : #################################################################
################################################################################
################################################################################
################################################################################
############## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(3)T3, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 15-Apr-99 16:12 by kpma
Image text-base: 0x80008088, data-base: 0x80A05BAC
cisco 2620 (MPC860) processor (revision 0x600) with 24576K/8192K bytes of memory
.
Processor board ID JAD05500Z7J (3892636774)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
4 Voice FXS interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
*** Watch Dog Timeout ***
PC = 0x808968ec, SP = 0x81112920
C2600 platform with 32768 Kbytes of main memory
========================================
The IOS currently installed is:
IOS=c2600-is-mz.120-3.T3.bin
Kindly help.
12-27-2005 09:05 PM
Hi Friend,
If the router starts crashing after a configuration change or a change in the Cisco IOS software version, then it is probably software-related.
Please check this linmk for further troubleshooting
http://www.cisco.com/warp/public/122/crashes_watchdog_timeout.shtml
HTH
Ankur
12-28-2005 01:53 AM
Go thro. the followin link,
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_tech_note09186a00800f67db.shtml
i hope this solve ur probs.
Balaji.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: