I'm looking for router/L3 switch as replacement to my C2821.
There flows aprox. 50Mbit (planed 100Mbit in future) through this router, there are some dot1q interfaces and some about 50 rate-limits (nearly 50Mbits rate-limited, 100Mbit in future). This box is running 50%-90% cpu load.
I wouldn't use a 3550 being that they are EOL, the 3560 might be capable with the EMI software loaded. For future expandability, I would use a 3750-EMI for this. The 3750 switches are stackable between all models (32Gbps backplane sharing), and they act as one switch when stacked.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...