cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
500
Views
0
Helpful
2
Replies

router reboot bus error

awafe
Level 1
Level 1

Hi,

cisco router reebboot by itself has error message

System restarted by bus error at PC 0x604DDAFC, address 0xD0D0D0D

System image file is "slot0:rsp-jsv-mz.113-6.T", booted via slot0

IOS version 11.3(6)T

It seems to be has IOS bug any suggestion

2 Replies 2

scarothe
Level 1
Level 1

Greetings:

How long have you had this router. Code is rather elderly and it would seem odd that if it has been up for quite a while that all of a sudden, a bug would kick in.

How many times has it rebooted? Have you made any changes to the configuration lately or changed IOS?

Thanks...Steve

No their is no chnaging it happen twice in two week only thing I found IOS has been upgrade in 1998 11.3(6)T

sh ver

System restarted by bus error at PC 0x604DDAFC, address 0xD0D0D0D

System image file is "slot0:rsp-jsv-mz.113-6.T", booted via slot0

sco RSP4 (R5000) processor with 65536K/2072K bytes of memory.

R5000 processor, Implementation 35, Revision 2.1 (512KB Level 2 Cache)

Last reset from power-on

G.703/E1 software, Version 1.0.

X.25 software, Version 3.0.0.

SuperLAT software copyright 1990 by Meridian Technology Corp).

Bridging software.

TN3270 Emulation software.

Chassis Interface.

1 AIP controller (1 ATM).

3 VIP2 controllers (5 FastEthernet)(8 Token Ring).

5 FastEthernet/IEEE 802.3 interface(s)

8 Token Ring/IEEE 80q

2.5 interface(s)

1 ATM network interface(s)

123K bytes of non-volatile configuration memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

8192K bytes of Flash internal SIMM (Sector size 256K).

No slave installed in slot 3.

Configuration register is 0x102