Router/switch combo with VPN server and IPSEC support - which model?
I have been trying to determine which CISCO model(s) will provide the solution for our configuration requirements using your website. I am having some difficulty. We are setting up access to a data center for 3 clients. They will each access a separate server. The servers should all be connected to the same router via Ethernet ports. The router will be connected to the Internet also through an Ethernet port. The client will VPN into their respective servers, each using a different IP address (3 ip addresses). We need to have bandwidth throttling using the client ip address. The setup must also have a firewall, act as a VPN server and also support IPSEC. I figure that a router/switch combo is what I need. What would you recommend?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...