Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Router won't boot

after doing password recovery i changed the config-register to 0x2101 and then when i reboot it i go to rommon > all the time.

this is what i get,

loadprog: bad file magic number: 0x0

boot: cannot load "flash:"

any ideas?

thanks

5 REPLIES
Cisco Employee

Re: Router won't boot

Hi Jimmy,

Seems like the IOS image is not valid / corrupt. Have to replace that with a good one.

Thanks,

yatin

New Member

Re: Router won't boot

yeah thats what i thought too, any ideas where i can get it, and how to do it?

Cisco Employee

Re: Router won't boot

This should be helpful.

Xmodem Console Download Procedure Using ROMmon

http://www.cisco.com/en/US/partner/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml

Thanks,

yatin

New Member

Re: Router won't boot

i tried to the link but it doesn't let me login. any ideas?

thanks

Cisco Employee

Re: Router won't boot

On CCO, just search for these keywords, you should be able to get to that doc.

Xmodem Console Download Procedure Using ROMmon

I hope the correct CCO login is being used.

Thanks,

yatin

224
Views
0
Helpful
5
Replies