Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

routers tempratures

Guys,

Does routers shows CPU or internal temprature ( not the CPU Utilization).

thanks.

4 REPLIES

Re: routers tempratures

Hi Friend,

Which router it is?

To display temperature, voltage, and blower information on the Cisco 7000 series, Cisco 7200 series, Cisco 7500 series routers, Cisco AS5300 series Access Servers, and Cisco 12000 series Gigabit Switch Routers (GSRs), use the show environment privileged EXEC command.

show environment [alarms | all | fans | hardware | last | leds | power-supply | table | temperatures | voltages

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun_r/ffrprt3/frf013.htm#wp1020533

Is it this what you are looking or something else?

Regards,

Ankur

Re: routers tempratures

Which Router do you have. It depends on the IOS version as well.

For example 7600 has that option:

Router> show environment temperature module 5

module 5 outlet temperature: 26C

module 5 inlet temperature: 23C

Router>

This example shows how to display temperature readings for all modules:

Router> show environment temperature

VTT 1 outlet temperature: 25C

VTT 2 outlet temperature: 24C

VTT 3 outlet temperature: 28C

module 1 outlet temperature: 24C

module 1 device-2 temperature: 29C

RP 1 outlet temperature: 25C

RP 1 inlet temperature: 29C

EARL 1 outlet temperature: 25C

EARL 1 inlet temperature: 22C

module 5 outlet temperature: 27C

module 5 inlet temperature: 22C

Router>

HTH, Please rate if it does.

-amit singh

Re: routers tempratures

Ankur, Amit

yes, this is exactly what I am looking for (platform 7000 series).

One more thing, does other than 7000 support this feature?

thanks,

Re: routers tempratures

This command is only for 7000,12000 and 5300's.

Check this:

show environment

To display temperature, voltage, and blower information on the Cisco 7000 series, Cisco 7200 series, Cisco 7500 series routers, Cisco AS5300 series access servers, and Cisco 12000 series Gigabit Switch Routers (GSRs), use the show environment command in privileged EXEC mode.

HTH, Please rate if it does.

-amit singh

386
Views
10
Helpful
4
Replies
CreatePlease login to create content